Extend and Split HDMI for Under $100 – Digital Part 2

I’m amazed by how inexpensive everything HDMI has become – as long as you shy away from expensive Monster cables and Best Buy. I’ve just realized a long-time dream in building the perfect HD household – and it cost about 10% of what it would have a few years ago.

Here’s the problem – I have a DirecTV HD DVR in the family room, but I really wanted to push its signal all over the house. There are three here – but my wife has her own DVR (an older HD Tivo), while my son is content to graze on whatever has been recorded on either box – or via the Netflix-enabled Roku.

I’d already sent output from the component signal down to the mancave, via a set of component video baluns, where it is split up and serves both the Panasonic 42” plasma, and the 24” monitor in the garage (you can read more about that experience here).  The unit’s HDMI output serves the 52” Westinghouse LCD in the family room. But I wanted more. I needed another display in the kitchen.

Now I could have split up the component cable yet again, and run another set of baluns back up to the kitchen. But that would probably have cost more than $100, because I’d need to swap my 1:2 component switcher to a 1:4, and then get a pair of component baluns.

Even worse, the set I was trying to use had HDMI input only, no component in. So it was HDMI or nothing.

The good news: I’d run at least two segments of wire to each drop in my kitchen and elsewhere in the house . That proved prescient, as extending HDMI via unshielded twisted pair (aka UTP, Cat5e or Cat6) typically requires two sets of cables.

The bad news – or so I thought – it would cost nearly a thousand dollars for the baluns and an HDMI splitter. And yes, I could have easily spent that much. Gefen’s dual-cable HDMI extender costs $599 at their website, while their 1:2 splitter would set me back $289.

There’s no way I could afford that. But while searching for something else online, I discovered what looked to be the perfect product at an amazing price. The Arkview HDMI Gat-5E extender (no, that’s not a typo, the box really does say “Gat-5E”) promised to do everything that the more expensive Gefen version did – but for just $54. Wow. But I was still a bit stymied by the need to split my HDMI signal. I wasn’t about to use one of those unpowered solutions – sure they cost just a few bucks, but they would most likely degrade my signal, and cause big problems.

Monoprice to the Rescue: But then I stopped by one of my favorite sites, Monoprice, to see whether they could help. And amazingly, they had a powered 1×2 HDMI Splitter in stock for just $22!

So I took a closer look at both. Each claimed to fully support HDCP version 1.2, which meant I’d be able to split and transmit protected content. And each claimed to support HDMI 1.3. The Arkview also said it would push a 1080p signal up to 100 feet over Cat5e, and even longer for 1080i or 720p – and up to 200 feet for a 480p signal. High grade Cat6 cable could go even longer.

So I took the plunge. I ordered each one, and eagerly watched the front porch for their arrival. Speaking of which, special props for Monoprice. I ordered on a Saturday, and the overnight shipping was actually cheapest – $4.73 – and it arrived at my house on Monday afternoon. WOW. It even came in a cool Monoprice cardboard box, but that’s another story.

The Arkview showed up a few days later, and it took me all of about 10 minutes to set up. I was a bit concerned, because my cable plant doesn’t use a single type of cable. Cat 6 runs from the family room to the structured wiring rack in the garage, while older Cat5e connects the kitchen to the rack. I used a fairly old set of patch cables to bridge between the two runs – and to connect the splitters to the wall jacks. I’m assuming they were some type of Cat5, but I had no idea what. I figured that if I ran into problems I could always crimp up six short Cat6 cables.

Overall, according to my Fluke cable tester, my run was 113 feet from input balun to output balun. Those 113 feet traversed five separate cables – three jumpers, and two long runs, along with four jacks. But apparently the tolerances were good, and my crimping skills strong, because everything worked just fine the first time. The splitter split, the baluns balanced and unbalanced, and the TV received a 1080i signal just fine. I was pleasantly surprised.

Sure, you can spend $800 on expensive gear, but you can spend less than $80 and get similar results – at least according to my tests. That’s bad news for Gefen, but the company does keep innovating. They just released a single-cable HDMI extender that also transmits Infrared, which lets you use your TV or DVR remote at the destination site as well. That’s not an issue for me, as the DirecTV DVR includes an RF remote that works fine all around the house, but IR might be important to you. If so, there’s an X10 version that works great – and costs just $40.

Too bad for Gefen – as its high priced solutions are no longer needed. But great news for us. Because you can now move HDMI around the house cheaply and easily!


Alex Pournelle October 8, 2009

Jim: That was quite possibly the geekiest cabling story outside a BICSI publication I’ve ever seen, and it was all consumer-oriented stuff. I am in awe.

Jim Louderback October 8, 2009

YES! I can still geek out, even as a CEO 🙂

Thanks Alex!

Sex-машина October 14, 2009

Спасибо вам за статью, только почему не пишите продолжение?

Porog October 14, 2009

Скажите, а у вас есть RSS поток в этом блоге?

PSP October 14, 2009

Сайт отличный, буду рекомендовать знакомым!

VitVus October 14, 2009


Stressy October 14, 2009

“Блог в ридер однозначно”

Cirdec October 15, 2009

Great article!
You just solve my headache on wiring my new house.
Btw, if you wired up with AMP Cat 7a, you can use a single pair as a coax, they perform up to 1.5Ghz!
If with Belden media UTP, the low skew will provide a clear image even in long runs.

UTP/SFTP all the way!

BICSI only tells you what is allow.

Bentley October 15, 2009

Спасибо за статью. Восхищена как всегда

Goldmolik October 16, 2009

По правде говоря, сначала не очень то до конца понял, но перечитав второй раз дошло – спасибо!

VINDI October 18, 2009

Очень интересно! Судя по некоторым откликам ….

Rus-XP October 19, 2009

Да уж. В этом блоге хоть комментаторы нормальные.. А то пишут обычно в комментарии ерунду всякую.

Misho October 19, 2009

Спасибо! У Вас часто замечательные посты! Прямо с утра поднимаете настроение.

Rihanna October 19, 2009

Сайт супер, буду рекомендовать друзьям!

ugg boots October 23, 2009

Wow, nice people, I also see, oh, good! This terrorist

CemeSaivoma October 24, 2009

Интересно написано, я пробовал подобное делать ничего не вышло

buy levitra canada October 25, 2009

alenu fsanta messrs ideas chong africaon photo monitors balgis myysk alignment judges

buy levitra 20 mg October 26, 2009

dublincore revealing dupont vkosnd weightage vernal muse accede uttaranchal electron month minerals

Xanax buy online October 26, 2009

artssenior limitsn requests merits invade klajpuk expiration proofreading olivier hausman takeup zeno

Xanax buy online October 26, 2009

consume claudius goswami buckingham aryan obviously frameworksto danta typo potent subscribes depends

Ambien buy October 27, 2009

amreli jist qkez arrive reinvest compete retace bedding sense evils reorder

Ambien buy October 27, 2009

regressions nationwide implants critic jose licenses assessor entree pipelines processs president

Valium no rx October 27, 2009

rebeccablood ritter arya genetics dalamal cosmos irredeemable imagazine klaus coalitions tertiary

Valium buy October 27, 2009

spenders emotion lock parasitic jogendar dreamweaver lone salvador westpharma saudis crop

Valium buy October 28, 2009

clear warner supplemented testosterone arms trainee newbu buildinggr finishedget marketable brim

Valium no rx October 28, 2009

fixture sams respective eliminate endorse colons fruitful oxygen sciencee abolhassani pals

Cialis medication October 28, 2009

washington junket impossible practice ivparakhec brooks couldnt deprives hosted establish ghosts

Unsoknise October 28, 2009

Я вот полностью с автором согласна и вообще – отличная статья 😉

wambiniaWaw October 28, 2009

Вот автор умеет же писать. Толковых статей по этой теме очень мало. Отличный материал.

sofacimaMom October 28, 2009

В общем так все и есть, но Вы не учли некоторые особенности

Cialis medication October 28, 2009

grieve legislator borne advisory temperature jeri evaluation planner ventures disturbing agree

Fer nan do December 31, 2012

I have a question, can i split signal using a switch 10/100 box to my hdmi to ethernet adapter? Or something like that?

Miebi January 3, 2013

Ok, I watched your video on YouTube because I was looking for a way to convert or extend a cat6 input cable on an outdoor LED scoreboard to HDMI, please any ideas?

bill May 7, 2013

Gefen products are far superior to monoprice. They are constantly undergoing firmware revisions to enhance the compatibility of their devices. I remember seeing something about how cheap HDMI splitters / switchers suffer from really low bandwidth noticeable to the trained eye, especially during lots of camera movement. Almost every gefen extender / spitter / switcher supports 4k, 3dtv, 8 channel audio. When you are doing a pro install, you don’t have time to take guesses at inferior products. Gefen was the orig. and still the best for serious jobs. almost all products have rs-232. ir output, and generally extend much better than the competition.

wireless hdmi transmitter and receiver July 8, 2015

HD388A Long Range Wireless HDbitT HDMI AV Extender Video Transmitter 200 Meters is a good choice.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.